Electrical Panel Lockout

Electrical Panel Lockout - Circular

Designed to lockout electrical panel buttons and switches with no inbuilt lockout provisions.
Work in a 2-stage operation. The base plate should be attached directly onto the electrical panel over the top of the relevant switch using the super strong adhesive backing / riveting / bolting.
When in place, the electrical plugs / switches / buttons can be isolated by placing the house unit over the top of base plate - hence preventing the access to the isolated switch. Then, they can be locked in place with a Lockout Padlock.

Code	Description
EP - 01	Electrical Panel Lockout - Circular Small
EP - 02	Electrical Panel Lockout - Circular Large

Designed to lockout electrical panel buttons and switches with no inbuilt lockout provisions.
Work in a 2-stage operation. The base plate should be attached directly onto the electrical panel over the top of the relevant switch using the super strong adhesive backing / riveting / bolting.
When in place, the electrical plugs / switches / buttons can be isolated by placing the house unit over the top of base plate - hence preventing the access to the isolated switch. Then, they can be locked in place with a Lockout Padlock.
Square units are specially designed for the switches with levers.
Can be cut from any side / direction to suit the installation on different panels with varied wiring / attachments to the switches / conduits, levers protruding out or of different shapes.

Code	Description
EP - 03	Electrical Panel Lockout Box - Small
EP - 04	Electrical Panel Lockout Box - Big
EP - 05	Electrical Panel Lockout Box - Big 45°
EP - 06	Electrical Panel Lockout Box - Big 90°
EP - 07	Electrical Panel Lockout Box - Large

Prohibits access to a switch or control. Clear bases and cover allow visibility of nameplates and labels.
Horse shoe shaped retrofit base allows use with raised nameplates and off-center installation to accommodate rotary switch knobs.
Fits both 22.5 mm and 30.5 mm diameter switches.
Accommodates buttons up to 50 mm diameter and 45 mm tall.
Supplied with one cover, one base and one retrofit base with double sided adhesive tape.

Code	Description
EP - 08	Flexible Cocoon

Best solution for the electrical panels and control stations oversize push buttons.
Also finds its application on the special crane / heavy machinery.
Can be easily installed in seconds by just placing it on the push buttons thus concealing them inside, hence protecting them from being accidently energized.
The two parts are plugged and then locked out with the help of our lockout padlock.
Inner size of 70 mm x 85 mm height with 30 mm dia hole in center.

Code	Description
EP - 09	Oversize Push Button Lockout

Safe and effective method of locking out emergency stop type push buttons of normal sizes.
Supplied with a red beak padlock installer.
Inner Dia : 33 x 68 mm, Hole Dia : 29 mm

Code	Description
EP - 10	Normal Push Button Lockout

Freezes the movement of the bigger handles / levers installed on the electrical panels.
Yellow base and flexible powder coated stainless steel strip of 25 mm x 300 mm with 20 holes makes it impossible for the handle to move from their position once locked with the help of two yellow clamps and a lockout padlock.
Recommended for handles and all kinds of levers having no arrangement for lockout.

Code	Description
EP - 11	Electrical Panel Handle Lockout

Code	Description
EP - 12	Switch Cover Lockout - 30 mm hole dia
EP - 13	Switch Cover Lockout Big - 30 mm hole dia

Used to lock the racking in - out point of air circuit breaker and vacuumed circuit breaker, etc. so that no one could operate the particular device.
Also used for locking switches that are recessed inside a plane surface.
Easily rotated in any direction - have three holes on the bottom part for fixing it with the help of screws / rivets.
It can also be installed to the surface by using the strong double sided tapes.
Dimension : Outer dia - 46 mm, Inner dia - 32 mm, lower cover circle side wall thickness - 7 mm
Overall thickness - 8 mm (upper - 3 mm, lower - 5 mm), locking hole dia - 9 mm

Code	Description
EP - 14	Electrical Panel Hole Lockout